Smeg SI2M7643D Manuale Utente Scaricare il pdf (Pagina 18)

Serial number ...........................

Built-in hobs

Only use the built-in hobs after you

assemble the hob into correct built-in units

and work surfaces that align to the

standards.

Connection cable

• The hob is supplied with the connection

cable.

• Replace the damaged mains cable only

with the spare parts cable. Speak to

your local Authorised Service Center.

WARNING! All electrical

connections must be made by

a qualified electrician.

CAUTION! Do not drill or

solder the wire ends. This is

strictly forbidden!

CAUTION! Do not connect the

cable without cable end sleeve.

Two-phase connection

1. Remove the cable end sleeve from

black and brown wires.

2. Remove an insulation of the brown

and black cable ends.

3. Apply a new wire end sleeve of 1.5

mm² on each cable end. (special tool

required).

Cable cross section

230V~ 400V 2~N

One-phase connection - 230 V~ Two-phase connection - 400 V 2 ~ N

Green - yellow Green - yellow

N Blue and blue Blue and blue N

L Black and brown Black L1

Brown L2

Attaching the seal - On-top

installation

1. Clean the worktop around the cut out

area.

2. Attach the supplied thinner seal stripe

to the lower edge of the hob along the

outer edge of the glass ceramic. Do

not extend it. Make sure that the ends

of the seal stripe are located in the

middle of one side of the hob.

3. Add some mm when you cut the seal

stripe to the length.

4. Push the two ends of seal stripe

together.

Attaching the seal - Integrated

installation

1. Clean the rabbets in the worktop.

2. Cut the supplied thicker seal stripe

into 4 stripes. The stripes must have

the same length as the rabbets.

3. Cut the ends of the stripes at an angle

of 45°. They should fit in the corners of

the rabbets accurately.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 71 72

Commenti su questo manuale

Nessun commento

Smeg SI2M7643D Manuale Utente Pagina 18

Commenti su questo manuale

Prodotti e manuali riguardandi Piani cottura Smeg SI2M7643D