Smeg PV640S Manuale di Servizio Scaricare il pdf (Pagina 23)

Instructions for the installer

9.3 Adjustment for LPG

Unscrew screw C and push air regulator D as far as it

will go.

Using a 7-mm wrench, remove nozzle E and replace it

with the appropriate nozzle, following the instructions in

the tables for the type of gas to be used. The nozzle

tightening torque must be no more than 3 Nm.

Adjust the air by sliding regulator D until distance “X”

indicated in table in “9.5 Primary air adjustment” is

reached.

Lock regulator D by tightening screw C.

9.4 Adjustment for natural gas

To reset the appliance for operation with this type of gas, carry out the same

steps as described in “9.3 Adjustment for LPG”, but select the nozzles and

adjust the primary air for natural gas as indicated in the tables in "9.2 Burner and

nozzle characteristics table” and “9.5 Primary air adjustment”. After the

adjustments have been carried out, restore the seals with sealing wax or

equivalent material.

1 2 ... 18 19 20 21 22 23 24 25 26

Nessun commento

Smeg PV640S Manuale di Servizio Pagina 23