Smeg PV175CB Manuale Utente Scaricare il pdf (Pagina 12)

Installation

36

5 Installation

5.1 Safety instructions

Veneers, adhesives or plastic coatings on

adjacent furniture should be temperature-

resistant (>90°C), otherwise they might

warp over time.

The minimum distances must also be

respected for the edges of the hob on the

back as indicated in the mounting

illustrations.

5.2 Section cut from the work surface

Create an opening with the dimensions

shown in the figure in the work surface of

the piece of furniture. Keep a minimum

distance of 50 mm from the rear edge.

This appliance may be mounted against

walls higher than the work surface on

condition that a minimum distance of 150

mm is kept between the appliance and the

wall, as shown in the figure, so as to avoid

damage from overheating.

Make sure there is a minimum distance of

750 mm between the hob and any shelf

that may be installed directly above it.

Heat production during appliance

operation

Risk of fire

• Check that the piece of furniture material

is heat resistant.

• Check that the piece of furniture has the

required slots.

The minimum distance between a

ventilation hood and the cooking

surface must be at least the

distance indicated in the ventilation

hood installation instructions.

The following operation requires

building and/or carpentry work

and must therefore be carried out

by a competent tradesman.

Installation can be carried out on

various materials such as masonry,

metal, solid wood or plastic

laminated wood as long as they

are heat resistant (>90°C).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Commenti su questo manuale

Nessun commento