Smeg PGF95BE-1 Manuale delle Istruzioni Scaricare il pdf (Pagina 10)

Instructions for the installer

2.6 Gas connection

Connection to the gas mains may be made with a rigid copper pipe or

with a flexible pipe conforming to the provisions defined by UNI-CIG

7129.

After connection operations, check for leaks using a soapy solution.

The hob has been inspected for G20 natural gas (2H) at a pressure of 20

mbar. For use with other types of gas, see chapter “3. ADJUSTMENT TO

DIFFERENT TYPES OF GAS. The hose connection at the rear of the

appliance has a ½” internal thread (ISO 228-1).

Connection with rigid copper pipe:

the connection to the gas mains must

not provoke stress of any kind on the

appliance.

Connection may be made by using

biconicaladapter D with insertion of

gasket C supplied.

Connection with flexible steel pipe:

use only flexible stainless steel pipes

conforming to UNI-CIG 9891

regulations, inserting gasket C

supplied between the fitting A and the

flexible pipe B.

The flexible pipe must be installed so that pipe length does not exceed 2

meters of maximum extension. Make sure that the pipes do not touch

any moving parts or become crushed.

2.7 Connection to LPG

Use a pressure regulator and make the connection to the tank according

to the provisions of UNI-CIG 7432 and UNI-CIG 7131. Make sure that

feed pressure conforms to the levels shown in the table in paragraph “3.2

Burner and nozzle characteristics table

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Nessun commento

Smeg PGF95BE-1 Manuale delle Istruzioni Pagina 10